Turn the settings all the way up and back down again to a low setting. Turn the training aid upside down and give the butt (grip) end a light tap on the floor to unlock the magnets. With a light hold and nice relaxed arms, perform a full swing and let the head of the unit accelerate through the bottom of the arc into the finish position.

Hold the barrel (head) in one hand and the grip in the other. Turn in opposing directions - like wringing out a wet towel. Set the white marker inline with your desired setting.

Both training aids are zero maintenance. To ensure it's longevity, use and store in dry conditions. Prevent any contact with the ground and any impacts when in use. Keep it in a protective sleeve to prevent any unnecessary damage. The grip can be replaced whenever it begins to feel worn.

Swing Precaution Checklist for Swing Caddy and Hole In One Training Aids

To ensure safety, maintain performance, and prolong the life of your Swing Caddy and Hole In One training aids, please follow these updated guidelines:

General Safety Guidelines

1. Choose a Safe Practice Area
   Ensure you have ample space to swing without any obstacles. Practice only in open areas where you won't risk hitting people, animals, or objects.

2. Wear Golf Gloves
   Always wear golf gloves to maintain a secure grip and prevent slippage during practice.

3. Avoid Wet Hands
   Do not swing with wet hands, as this increases the risk of the product slipping from your grip.

4. Use for Intended Purposes Only
   This product is designed exclusively for golf swing practice. Do not use it for any other purposes.

5. Supervise Children
   Children must only use this product under the supervision of a responsible adult.

6. Practice Safely Around Others
   Never swing the training aid near people, animals, or fragile objects that could be injured or damaged.

7. Keep Dry
   Do not immerse the product in water. Avoid using or storing it in damp or humid conditions.

8. Inspect Before Use
   Regularly check the training aid for signs of wear or damage. Do not use the product if it appears damaged.

9. Follow Manufacturer Guidelines
   Always adhere to the manufacturer's instructions for use, storage, and care.

10. Store Responsibly
    When not in use, store the training aid in a safe and secure location, away from high heat or extreme cold.

Head Impact Warning

• Avoid Ground Contact
  The head of the training aid should never make contact with the ground or turf during practice swings. Doing so can damage the product.
• Warranty Void on Impact
  If the head of the training aid is impacted during use, the warranty will become void. In such cases, the training aid must be replaced to ensure continued safety and performance.

Grip Care and Maintenance

• Regular Cleaning and Inspection
  The grip should be regularly cleaned to maintain its tackiness and checked for signs of wear or damage.
• Timely Replacement
  A replacement grip is required as soon as there is sufficient wear to compromise its effectiveness or safety. Contact the manufacturer or supplier for approved replacement grips.

By adhering to these guidelines, you can practice with confidence while protecting your investment in the training aid.